comments
Show only reviews in English (1)
The ideal tool for accurate & cost-effective monitoring of the quality of Digital TV & Radio Broadcast Networks.
Combine any two RF standards in one 1RU device! Up to 4 parallel monitoring modules (2 per RF standard).
"*" indicates required fields
The ideal tool for accurate & cost-effective monitoring probe for:
Combine any two RF standards in one single 1RU device.
Combined with a Network Monitoring System or not, the EdgeProbe Advanced provides a powerful broadcast network alert & diagnosis tool allowing Digital TV & Radio network operators to monitor global trends and anticipate potential failures.
EdgeProbe Advanced is able to monitor the RF signal, through its RF inputs (up to 4 in 1RU), as well as the baseband transport before modulator, through its ASI and IP inputs.
Signal Level, MER, SNR, BER
Modulation parameters, L1 signaling in DVB-T2, TPS in DVB-T
Channel Impulse Response
DVB-T, DVB-T2 (1.1.1, 1.2.1, 1.3.1) & T2 Lite support
Signal Level, CNR, Eb/N0, Link Margin, BER
Multistream support, modulation parameters
LNB powering & configuration
Frequency range (L-band after LNB down conversion): 950 to 2150 MHz
DVB-S, DVB-S2; C-band, Ku-band, Ka-band
Signal Level, MER, SNR, BER per Layer A/B/C
Modulation parameters: TMCC, Layer A/B/C
Channel Impulse Response
Signal Level, MER, BER
Modulation parameters, L1 part2 signaling in DVB-C2
RF Frame Delay & Drift
Carrier Frequency Offset & Drift
Quick identification of which TX site is causing SFN issues!
Monitor TS & T2-MI & BTS baseband distribution links at Head-End output and TX site input through the ASI and IP inputs (up to 4 in 1RU)
Forward the demodulated analyzed TS over ASI or IP output (T2-MI PLP extraction support)
VLAN support on the IP Data link
ETSI TR 101 290 Priority 1, 2, 3
QoS indicators (optional): Service Availability Error & Service Degradation Error
Verify Regionalization: Service Plan view, PID/Service presence, Scrambling
Service & components bitrates
ETSI TR 101 290 T2-MI packet alarms
T2 L1 pre/post signaling
T2-MI PLP TS analysis and extraction support
BTS: IIP, TMCC packets monitoring
OneBeam: T2-MI marker and In-Band PID monitoring
Alarm logs up to 6 months
RF parameter trends up to 6 months
TS recording (manual trigger)
Internal GNSS: GPS & GLONASS support, for internal 1PPS reference signal generation
Dual Power Supply: one additional Power Supply can be installed on the equipment in order to ensure the power redundancy
Powerful network alert & diagnosis tool: monitor global trends and anticipate potential failures
Compatible SNMP v2c and v2c INFORM for alarming and device configuration
Web GUI access: support of low bandwidth Internet connection (3G, GPRS)
*
Up to 4x RF inputs (N-type female – 50Ω or F-type female – 75 Ω) depending on RF standard
DVB-T/T2/T2 Lite
DVB-S, DVB-S2
ISDB-T/Tb
DVB-C/C2
DVB-T/T2, DVB-C/C2, ISDB-T/Tb: 40 to 1000 MHz
DVB-S/S2: 950 to 2150 MHz (after LNB down conversion)
-80 to -5 dBm (28 to 104 dBµV)
Up to 4x ASI/ETI in/out (BNC-type female – 75 Ω)
Up to 4x Gigabit Ethernet for Data in/out (VLAN support)
1x GNSS antenna input (SMA-type – 50 Ω) (GPS/GLONASS) HW option, 3.3V antenna power up
1x 1PPS input (BNC-type female – 50 Ω)
1x 10MHz input (BNC-type female – 50 Ω)
-20 to 55°C / -4 to 131 °F
-20 to 70°C / -4 to 158°F
0 to 95%, non condensing
Show only reviews in English (1)
LUIZ RODRIGO OPENHEIMER –
GREAT EQUIPMENT
We are testing the EDGE PROBE ADVANCED in Brazil for signal monitoring ISDB-TB.
The product is excellent. In addition to tracking and enable alarms in all parameters of the ISDB-TB, still has the powerful tool of analysis of SFN, very important in the monitramento of broadcasting stations and GAP Fillers.
If you need a complete solution for ISDB-TB, the EDGE PROBE ADVANCED is the one!