• EdgeProbe RF front
  • EdgeProbe RF back

DVB-T/T2 RF Monitoring Probe
EdgeProbe RF DVB-T/T2

There are no reviews yet.

EdgeProbe RF is the ideal & most cost-effective high-quality solution for controlling remotely the signal transmission of your low/mid power TX & relay sites that are sometimes difficult to reach.

SKU: EdgeProbe RF DVB-T/T2 Category:

EdgeProbe RF DVB-T/T2 - Ask for Quote

Please fill in the following information and detail your monitoring needs. Also indicate if possible the software options you would be interested in.

Applications

  • 24/7 Monitoring and Maintenance of DTV live transmission
  • Cost-effective Monitoring of transmitters and relay sites
  • Generation of Service Availability reports for Service Level Agreements
  • Rebroadcasting receiver: RF to ASI or IP, with transcoding capacities
  • Live transmission recorder

Benefits

  • Standalone, easy to use and configure, fast deployment, SNMP compatible
  • Increase customer satisfaction by detecting & preventing DTV network degradations before your customers do
  • Reduce TX sites maintenance cost by anticipating and identifying issues
  • Remotely accessible, compatible with low bandwidth control networks (GPRS/3G)
  • Low power consumption 8W

Combined with a Network Monitoring System or not, the EdgeProbe RF provides a powerful broadcast network alert & diagnosis tool allowing DTV network operators to monitor global trends and anticipate potential failures.
EdgeProbe RF is able to monitor DVB-T and DVB-T2 signals at transmitter output or OFF AIR through its RF input (1RU format).

Precise DVB-T/T2 RF signal quality monitor

Signal Level, MER, SNR, BER

Modulation parameters, L1 signaling in DVB-T2, TPS in DVB-T

Channel Impulse Response

DVB-T, DVB-T2 (1.1.1, 1.2.1, 1.3.1) & T2 Lite support

DVB-T2 Single/Multi-PLP reception support

Complete TS monitor

ETSI TR 101 290 Priority 1, 2, 3

QoS indicators (optional): Service Availability Error & Service Degradation Error

Verify Regionalization: Service Plan view, PID/Service presence, Scrambling

Service & components bitrates

Powerful Rebroadcasting Receiver - Gateway from RF to ASI/IP

Forward the analyzed TS over ASI output

Forward the analyzed TS over IP control port (VLAN support)

Transcoding solution for confidence monitoring

Coupled with a TRANSBOX device, EdgeProbe can provide service transcoding and forward to third-party analysis systems

Controlled by the EdgeProbe, the TRANSBOX performs:

– service extraction from the input TS (SPTS or MPTS)

– real-time audio/video transcoding: 1 to 10 Mbps output bitrate

– transcoded SPTS forward over IP Data

32 GB of internal storage

Alarm logs up to 6 months

RF parameter trends up to 6 months

TS recording (manual trigger)

Remote connection

Compatible with all Network Monitoring Systems, providing a powerful network alert & diagnosis tool: monitor global trends and anticipate potential failures.

Compatible SNMP v2c and v2c INFORM for alarming and device configuration

Web GUI access: support of low bandwidth Internet connection (3G, GPRS)

INTERFACES

  • RF
  • .

  • Connector In
  • 1 x RF input (N-type female – 50 Ω)

  • Standards
  • DVB-T support – ETSI EN 300 744

    DVB-T2 & T2 Lite support – ETSI EN 302 755 v1.3.1

  • Frequency range
  • 40 to 1000 MHz

  • Sensitivity
  • -80 to -5 dBm

  • Channel bandwidth
  • 1.7, 5, 6, 7 & 8 MHz

  • Control/Data
  • 1x Gigabit Ethernet for:

    HTTP Web GUI (management),

    SNMP v2/v2c/INFORM (alarm traps and OID command SET/GET),

    FTP (firmware update, log file download, profile update),

    IP Data in/out (VLAN support) – TSoIP input monitoring, or analyzed TS forward on IP out (RF in to IP out)

  • TS
  • 1x ASI output (BNC-type female – 75 Ω)

MONITORING FEATURES

  • RF Monitor
  • Power, SNR, MER, BER

  • Demodulation status
  • Lock / Unlock

  • Signal level
  • -90 to -5 dBm ±1 dBm, typically ±0.5 dBm, resolution 0.2 dBm

  • MER
  • 0 to 40 dB (0 to 36 dB: ±1 dB, 36 to 40 dB: ±2 dB)

  • BER (DVB-T)
  • Pre/Post-Viterbi, Post-RS

  • BER (DVB-T2)
  • Pre/Post-LDPC, Post-BCH

  • Modulation parameters
  • L1 signaling in DVB-T2, TPS in DVB-T

  • SFN Monitor at RX site
  • Channel Impulse Response (CIR): Echoes Delay and Power Level alarming masks

  • ETSI TR 101 290 Monitor
  • TS Base
  • MPEG-2 TS Monitor, ETSI TR 101 290 Priority 1 and 2

  • TS Advanced
  • ETSI TR 101 290 Priority 3, QoS (SAE/SDE)

  • .
  • .

  • Service Plan
  • Verify regional services, Service & PID bitrates, Scrambling, Service & PID presence

  • Scanning
  • Monitor sequentially multiple channel frequencies over 1 RF input

  • Extended Memory
  • 32 GB of internal storage for: Event logs up to 6 months, Trends up to 6 months, TS recording

  • TRANSBOX
  • Coupled with a TRANSBOX device, EdgeProbe can provide service transcoding and forward to third-party analysis systems: service extraction from the input TS (SPTS or MPTS), real-time audio/video transcoding: 1 to 10 Mbps output bitrate, transcoded SPTS forward over IP Data

PHYSICAL

  • Height: 45 mm / 1.7 in, Width: 440 mm / 17.3 in, Depth: 130 mm / 5.1 in
  • Format: 1 RU (19’’)
  • Power supply: 100-240 VAC ±10%, Power consumption: 8W

ENVIRONMENT

  • Operating temperature
  • -20 to 55°C / -4 to 131 °F

  • Storage temperature
  • 20°C to 70°C / -4°F to 158°F

  • Humidity
  • 0 to 95%, non condensing

EdgeProbe RF DVB-T/T2 includes by default:

  • Hardware: 1x (RF in, ASI out) & 1x IP Control
  • Software:
    • DVB-T/T2 RF monitor: RF parameters, Channel Impulse Response
    • TS forward over ASI or IP outputs
    • VLAN support for IP forward

Software Options

  • Scanning: Multiple RF channels sequential monitoring
  • TS Base Monitor: ETR290 Priority 1, 2
  • TS Advanced Monitor: ETR290 Priority 3
  • Qos Monitor: SAE (Service Availability Error), SDE (Service Degradation Error)
  • Service Plan: Multiplex Service/PID monitoring
  • Extended Memory: 32 GB storage (trends, logs, TS record)

Hardware Options

  • TRANSBOX: Stream 1 or 2 compressed service(s)
  • Tropicalization: Preserve the HW from corrosion – chassis & electronic component treatment for tropical and salty environment

 

Default Warranty

  • Standard: 1 YEAR Hardware Warranty and Basic Helpdesk (HW RMA)

Optional Support Services

  • Advance HW + SW 1/3/5 YEAR including:
    • Advance Replacement: hardware warranty with replacement before reception of faulty unit
    • Software Upgrade: access to all software updates & upgrades
    • Priority HelpDesk: priority access to the support helpdesk for any question on product usage, problem request, and change/improvement requests
  • Premium HW 1/3/5 YEAR including:
    • Premium Advance Replacement : hardware warranty with 1 business day replacement before reception of faulty unit (from a dedicated customer spare stock)
  • Premium SW 1/3/5 YEAR including:
    • Premium Software Support: SLA contract manager + guaranteed response time + 2 days per year local proactive visit (training including presentation of new available features, 1 TX site & or HE visit & configuration improvement, discussion on needs for new functionalities)
    • Software Upgrade: access to all software updates & upgrades
    • Priority HelpDesk: priority access to the support helpdesk for any question on product usage, problem request, and change/improvement requests

More details on the Waranties page.

Documents

Related products

comments

There are no reviews yet.

Be the first to review “DVB-T/T2 RF Monitoring Probe”

Your email address will not be published. Required fields are marked *